ich habe ein Problem beim E-Mail Versand.
Und zwar bekomme ich immer folgende Fehlermeldung von Office 365:
als Empfänger steht dort root@localhost aber dieses habe ich bei mir nirgendwo eingetragen, da ich per SMTP sende. Meine Config sieht folgendermaßen aus:Zahl Ausführungszeit Aufrufer Ereignis
MAIL-1 0 email_api.php:916 email_owner_changed() Issue #38 is assigned to @U1 instead of @U2.
MAIL-2 0 email_api.php:1208 email_send() ERROR: Message could not be sent - SMTP Fehler: Die folgenden Empfänger sind nicht korrekt: root@localhost: Recipient address reserved by RFC 2606
MAIL-3 0 email_api.php:1053 email_send_all() Server not responding for 5 seconds, aborting
Der E-Mail Versand von einem anderen PHP-Programm, was ich selber geschrieben habe klappt es per SMTP Versand.$g_webmaster_email = 'MeinVorname.meinNachname@unsereFirma.de';
$g_from_email = 'intranet@unsereFirma.de';
$g_from_name = 'Intranet';
$g_return_path_email = 'intranet@unsereFirma.de';
$g_enable_email_notification = ON;
$g_default_notify_flags = array(
'reporter' => ON,
'handler' => ON,
'monitor' => ON,
'bugnotes' => ON,
'category' => ON,
'explicit' => ON,
'threshold_min' => NOBODY,
'threshold_max' => NOBODY
);
$g_notify_flags['new'] = array(
'bugnotes' => OFF,
'monitor' => OFF
);
$g_notify_flags['monitor'] = array(
'reporter' => OFF,
'handler' => OFF,
'monitor' => OFF,
'bugnotes' => OFF,
'explicit' => ON,
'threshold_min' => NOBODY,
'threshold_max' => NOBODY
);
$g_email_receive_own = OFF;
$g_validate_email = OFF;
$g_email_login_enabled = OFF;
$g_email_ensure_unique = ON;
$g_check_mx_record = OFF;
$g_allow_blank_email = OFF;
$g_limit_email_domains = array('unsereFirma.de');
$g_show_user_email_threshold = NOBODY;
$g_show_user_realname_threshold = NOBODY;
$g_mail_priority = 3;
$g_phpMailer_method = PHPMAILER_METHOD_SMTP; //PHPMAILER_METHOD_MAIL;
$g_smtp_host = 'smtp.office365.com'; //localhost';
$g_smtp_username = 'intranet@unsereFirma.de';
$g_smtp_password = 'XXXXXXXXXXXXXXXX';
$g_smtp_connection_mode = 'tls';
$g_smtp_port = 587;
$g_email_send_using_cronjob = OFF;
$g_email_separator1 = str_pad('', 70, '=');
$g_email_separator2 = str_pad('', 70, '-');
$g_email_padding_length = 28;
Bei MantisBT klappte dies am Angang (2-3 Mails kamen an) und nun aufmal keine Mehr, und dabei habe ich den Fehler raus gefunden.
Kann mir einer sagen, wo das root@localhost herkommt?
Über eine Antwort würde ich mich freuen.
Meine mantisBT Version ist: 1.3.1
vielen Dank
Gruß
Heiko